Ogontz Corporation

	Type CTV Specifications

Inlet

NPT

Outlet

NPT

Operating pressure PSIG

C_v

Weight

lbs

Body Material

1/2

300

2.0

0.75

304 SS

Flow Coefficient C_Vat set point

Note: For saturated steam systems only.

for ∆P_[psig]≥ 1/2 P_[inlet]

lbs/hr_[steam] = 1.84C_v(∆P + 14.7)

_{Maximum flow
rate – valve fully open}

To Order:

1/2

CTV

↑ Complete the model number by inserting the desired condensate discharge temperature in °F.

Actual CTV temperature setting depends upon the requirements and variables of your specific application.

For example:

A 180°F setting is ideal for most winterization systems; a 240°F setting is suggested for most process tracing and drip legs; for impulse and sample lines, a 60°, 100° or 120°F setting could be used. Other temperature set points available.

Guarantee:

We will repair or replace on a no-charge basis, F.O.B. Willow Grove, PA. Ogontz valves returned to us within 18 months if found to be defective in material or workmanship

Back to CTV Page

Back to Ogontz Home Page